a)  

b) 

Figure 1. Coaxial resonator measuring transducer (a) and its aperture forming area, 

where the central core of the coaxial forms a probe that can have various shapes (b) 

 

 

Figure 2. Field distribution in the near-surface layer of the sample under study 

for different radii and shapes of the probe tip 

 
In the process of working with microwave sensors, changes in the structural and 

electrophysical parameters of the sample under study cause changes in the informative 
signal at the output of the device. Depending on the type of sensor, the deviation of the 
resonance frequency and Q-factor of the "resonator-sample" system, the amplitudes 
and phases of the microwave wave, the active and reactive components of the 
impedance can act as informative parameters. 

- 1548 -