appearance of new structures at the polymer-filler interface, which is not characteristic 
of the polymer matrix, has also been confirmed by electron microscopy.  

The effectiveness of the impact of the nature and content of metals on 

thermophysical (increase of thermal conductivity and temperature conductivity by 
26...46 % and 30…50 % respectively, decrease in the coefficient of thermal linear 
expansion by 4...56 %), physico-mechanical (increase of hardness by 23...45 %, the 
yield strength and proportionality by 11...18 % and 23...9 %, Young's modulus by 
11...25 %, the toughness by 37 %) and tribological (introduction of Ni improves 
phenylone wear during dry friction by 11 times, and Br by 26 times during friction with 
lubricant) properties of metal-containing polymers has been shown. 

Metal-containing polymers are a promising class of PCM, which has improved 

running ability compared with the closest analogues. Today, they have advantages 
according to physical and mechanical properties, while maintaining fire resistance and 
corrosion resistance, which is inherent in polymers, due to which the technical and 
economic effectiveness of MP application is beyond doubt. 

 

BIBLIOGRAPHICAL REFERENCES 

1.

 

Sazonova, E.V. Materials substitutions, Journal of Materials and 

Manufacturing, 1990, V. 7, No 6, рp. 5 – 8. 

2.

 

Khrushchov, M.M. Sovremennyye napravleniya v razvitii nauki ob 

iznosostoykosti materialov (Modern trends in the development of science on the wear 
resistance of materials) // Iznos i iznosostoykost'. Antifriktsionnyye materialy: Trudy 
III Vsesoyuznoy konf. po treniyu i iznosu v mashinakh. Moscow: «AN SSSR», 1960, 
V. 1. – pp. 8 – 14. [in Russian]. 

3.

 

Belyy, V.A., Yegorenkov, N.I., Koretskaya, L.S. Metallopolimernyye 

materialy i izdeliya (Metal-containing-polymer materials and products), Moscow: 
Khimiya, 1979. – 312 p. [in Russian]. 

4.

 

Sokolov, L.B., Gerasimov, V.D., Savinov, V.M., Belyakov, V.K. 

Termostoykiye aromaticheskiye poliamidy (Heat-resistant aromatic polyamides), 
Moscow: Khimiya, 1975. – 256 p. [in Russian]. 

5.

 

Yanovskii, Yu.G., Kozlov, G.V., Burya, A.I., and Lipatov, Yu.S. Thermal 

expansion of polymer composites filled with carbon nanotubes, Fiz. Mezomekh., 2007, 
No. 6, pp. 63–67. 

6.

 

Kozlov, P.M. Primenenie polimernykh materialov v konstruktsiyakh, 

rabotayushchikh pod nagruzkoi (The use of polymeric materials in constructions 
working under load), Moscow: Khimiya, 1966. – 364 p. [in Russian]. 

7.

 

Rzhevskaya, S.V. Materialovedenie: ucheb. dlya vuzov (Materials science: 

the textbook for high schools), Moscow: Logos, 2004. – 424 p. [in Russian]. 

- 1628 -