Notation:                                                                                                                 

Variant I: 

1) acceptance testing of the billet;  
2) active cold deformation of the billet according to a single scheme;  
3) cyclic deformation;  
4) active cold deformation with manufacturing the product of final geometry 

according to the deformation of the billet scheme;  

5) cyclic deformation of the cold-worked product;  
6) final testing of the properties and product certification.   
Variant II:  
1) acceptance testing of the billet;  
2)*** active cold deformation of the billet by interchanging different deformation 

schemes in a certain sequence; 

3) cyclic deformation;  
4) active cold deformation with manufacturing the product of final geometry 

according to the deformation of the billet scheme; 

5) cyclic deformation of the cold-worked product;  
6) final testing of the properties and product certification.   
Variant III: 
1) acceptance testing of the billet;  
2)       
3) 
– active cold deformation of the billet in combination with cyclic deformation; 
4) active cold deformation with manufacturing the product of final geometry 

according to the deformation of the billet scheme; 

5) cyclic deformation of the cold-worked product;  
6) final testing of the properties and product certification.   
 Variant IV:  
1) acceptance testing of the billet;  
2)*** – intensive active cold deformation of the billet using different deformation 

schemes in a certain sequence; 

3) 

 

heating

 – high-speed heating of the cold-worked billet; 

4) 

cooling 

– quenching; 

5) 

ACD 

– active cold deformation of the "hardened" billet; 

6) active cold deformation with manufacturing the product of final geometry 

according to the deformation of the billet scheme; 

7) 

CD 

– cyclic deformation of the cold-worked product;  

8)

 fnl.test.

 – final testing and product certification.   

Variant V:  

- 1698 -