Strip Based on UFC, Journal of Iron and Steel Research, International, (2013), 20(7), 
pp. 29–34. 

5. LIU En-yang, ZHANG Dian-hua, SUN Jie, PENG Liang-gui, GAO Bai-hong, 

SU Li-tao, Algorithm Design and Application of Laminar Cooling Feedback Control 
in Hot Strip Mill, Journal of Iron and Steel Research, International. (2012), 19(4), pp. 
39–42, DOI: https://doi.org/10.1016/S1006-706X(12)60085-5. 

6. 

Volodymyr 

Kukhar, 

Andrii 

Prysiazhnyi, 

Elena 

Balalayeva, 

Oleksandr Anishchenko, Designing of induction heaters for the edges of pre-rolled 
wide ultrafine sheets and strips correlated with the chilling end-effect, Modern 
Electrical and Energy System MEES’2017, IEEE, Kremenchuk, Ukraine, Kremenchuk 
Mykhailo Ostrohradskyi National University, November 15–17, (2017), pp. 404–407, 
DOI: https://doi.org/10.1109/MEES.2017.8248945.  

7. Yunbo Xu, Yongmei Yu, Xianghua Liu, and Guodong Wang, Modeling of 

microstructure evolution and mechanical properties during hot-strip rolling of Nb 
steels, Journal of University of Science and Technology, Beijing, Vol. 15, (2008), pp. 
396–401, DOI: https://doi.org/10.1016/S1005-8850(08)60075-4. 

8. P. Korczak, H. Dyja, Investigation of microstructure prediction during 

experimental thermo-mechanical plate rolling, Journal of Materials Processing 
Technology, 109, (2001), pp. 112–119, PII: S 0924-0136(00)00784-6. 

9. Xiangwei Kong, Liangyun Lan, Optimization of mechanical properties of low 

carbon bainitic steel using TMCP and accelerated cooling, 11th International 
Conference on Technology of Plasticity, ICTP, (2014), pp. 19–24, Nagoya Congress 
Center, Nagoya, Japan, Procedia Engineering 81 (2014), pp. 114–119, DOI: 
https://doi.org/10.1016/j.proeng.2014.09.136. 

10. Sir Harshad Bhadeshia, Thermomechanical Treatment of Steels Steels, 

Microstructure 

and 

Properties 

(Fourth 

edition), 

(2017), 

pp. 

271–301,  

DOI: https://doi.org/10.1016/B978-0-08-100270-4.00010-X. 

11. V. Carretero Olalla, V. Bliznuk, N. Sanchez, P. Thibaux, L.A.I. Kestens, R.H. 

Petrov, Analysis of the strengthening mechanisms in pipeline steels as a function of the 
hot rolling parameters, Materials Science & Engineering A 604, (2014), 
pp. 46–56, DOI: https://doi.org/10.1016/j.msea.2014.02.066. 

12. J. Zhao, W. Hu, X. Wang, J. Kang, Y. Cao, G. Yuan, H. Di, R.D.K. Misra, A 

Novel thermo-mechanical controlled processing for large-thickness microalloyed 560 
MPa (X80) pipeline strip under ultra-fast cooling, Materials Science & Engineering A 
673, 

(2016), 

pp. 

373–377, 

 DOI: https://doi.org/10.1016/j.msea.2016.07.089. 

13. J. Zhao, W. Hu, X. Wang, J. Kang, G. Yuan, H. Di, R.D.K. Misra, Effect of 

microstructure on the crack propagation behavior of microalloyed 560 MPa (X80) strip 

- 1727 -